>
> Few things I'd do (I've had this error before, I believe item #2 and/or #2
> fixed it)
And/or #3 I meant.
> 1) Are you using the right image?
> 2) Try re-downloading it, make sure ftp is in binary mode
> 3) Make sure you are using the latest PMconsole (3.5.1.4 for Windows and
> 3.5.3 for Unix is what you should use, I believe)
> 4) Try re-flashing it
> 5) If all of that doesn't work: Don't reboot, call Livingston tech
> support.
>
> On Thu, 21 Aug 1997, Robert M. Zachok wrote:
>
> > It's around 11pm EDT, and I was attempting to upgrade a PM2 from 3.5 to
> > 3.7 During the upgrade process, I received a message indicating an
> > invalid opcode and the upgrade was aborted. At that point the unit was
> > dead, so I rebooted it to no avail.
> >
> > I then attempted to netboot a generic PM2 image, which was successful
> > until ComOS started. Then I saw a message:
> >
> > Invalid length for flash 0/0 - 65535
> >
> > I'm suspecting that the flash has died. I tried to reformat using
> >
> > set register 0xffff 0x0102, but the command returned in just a few
> > seconds, rather than the 90 seconds the netboot instructions indicated.
> >
> > I'm desperate! If anyone out there can help, I'd sure appreciate it.
> > Please respond directly, since I only receive the digest of this list.
>