I would like to allocate 40 ip addresses to a client. I wanted to allocate
2 separate subnets (32 and 8). Will the following setup work???
user Password = "UNIX"
User-Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-Address = 209.01.01.1,
Framed-Route = "209.01.01.0/27 209.01.01.1 1",
Framed-Route = "209.01.01.32/29 209.01.01.1 1",
Framed-Routing = None,
Framed-Compression = Van-Jacobsen-TCP-IP,
Port-Limit = 1,
Idle-Timeout = 0,
Framed-MTU = 1500
Thanks.
Imran.
---------------------------------------------------------------------
Netwave Communications Inc. / Web: www.netwave.ca
1B Conestoga Drive, /^) / \ e-mail: info@netwave.ca
Suite 101 / / / / Ph: (905) 846 7303
Brampton, Ontario / / / / (416) 452 5578
L6Z 4N5 Canada / ( / / Fax: (905) 846 0326
/ \.../ /
/
( /N E T W A V E
\./
----------------------------
Gateway to the wired world
----------------------------