Note this will only allow SLIP and PPP. No text logins.
Everything else is fine.
>portmaster not configured completely yet:
> Interface: Unassigned (PPP,Listen) (PPP,Quiet)
>
>portmaster configured completely ok:
> Interface: ptp1 (PPP,Routing) (PPP,Routing)
This is normal. A port will always show 'Unassigned' until a call
connects. Then the interface is established.
>trying to add the Interface 'ptp1' show me:
This isn't ADDING an interface, just showing it.
>BAD PORTMASTER:
>Command> ifconfig
>ether0: flags=16<IP_UP,IPX_DOWN,BROADCAST>
> inet 167.114.25.201 netmask ffffffe0 broadcast 167.114.25.192 mtu
>1500
>
>trying to addd an interface show me:
>IP_DOWN!
Right. You CANNOT add an interface manually. Period.
Everything you showed here is normal.
-MZ
-- Livingston Enterprises - Chair, Department of Interstitial Affairs Phone: 800-458-9966 510-737-2100 FAX: 510-737-2110 megazone@livingston.com For support requests: support@livingston.com <http://www.livingston.com/> Snail mail: 4464 Willow Road, Pleasanton, CA 94588