Re: PM3 setup question => Pac Bell PRI

Shawn Morris (smorris@midwest.net)
Mon, 18 Aug 1997 08:07:11 -0500 (CDT)

set line1 isdn
set isdn-switch att-5ess
set framing line1 framing esf
set encoding line1 b8zs

************************************************
*Shawn Morris smorris@noc.midwest.net*
*Midwest Internet smorris@midwest.net*
*Network Operations 800.651.1599x217*
*300 E. Main 618.529-7271x217*
*Carbondale, IL 62901 http://www.midwest.net*
************************************************

On Sun, 17 Aug 1997, Jeff Northon wrote:

> Hi!
>
>
> I am having a problem with our first PM3. There is probably
> a setting off somewhere.
>
> We have Pac Bell PRI,
>
> features: ESF , B8ZS , AT&T #5 ESS ,
>
> (And from the Pac Bell guy's faxed notes " Need timing (clocking)
> from T-1 CKT - not from internal source".
>
> And the note says - Set for "CUSTOM"
>
> Err, where do I set that????
>
> I think that is what the problem is..
>
> ComOS version 3.7 as of last nite. 48 modems, the new ones.
>
> When I plug the PRI into line0, and then turn the PM3 on there is
> a red led by the first port (line0), then a second of red and green, then
> the red led is on solid. The manual says the PM3 doesn't understand
> the service from Pac Bell, Appendix A, led diagnostics.
>
>
> I have (mis)set the second port (port1) to be a T-1. It shows up as W24.
>
> Anyone want to show me my error?
>
> Thanks,
>
> Jeff Northon
> jeffo@sasquatch.com
> 408 336-3391
>
>
>
>
> Console log is featured below.
>
>
> PortMaster Console login: !root
> Password:
> ts-001> version
> Livingston PortMaster PM-3 ComOS 3.7
> System uptime is 2 minutes
> ts-001> show line0
> ---------------------- line0 - T1 Primary Rate ISDN ---------------
>
> Status: DOWN Framing: ESF Encoding: B8ZS PCM: u-law
>
> Receive Level: +2dB to -7.5dB
>
> Alarms Violations
> ----------------------------- -----------------------------
> *Blue 1 Bipolar 0
> Yellow 0 CRC Errors 0
> Receive Carrier Loss 0 Multiframe Sync 57001
> *Loss of Sync 1
>
>
>
> ts-001> show all
> Local Addr: 165.227.66.33 Default Host: 0.0.0.0
> Gateway: 165.227.66.1 Netmask: 255.255.255.192
> DNS Server: 165.227.66.1 Domain: sasquatch.com
>
> Port Speed Mdm Host Type Status Input Output
> Pend
> ---- ----- --- ---------------- ------ ------------- ---------- ----------
> ----
> C0 9600 off Login COMMAND 123 3865
> 2
> S0 64000 on Login/ NO-SERVICE 0 0
> 0
> S1 64000 on Login/ NO-SERVICE 0 0
> 0
> S2 64000 on Login/ NO-SERVICE 0 0
> 0
> S3 64000 on Login/ NO-SERVICE 0 0
> 0
> S4 64000 on Login/ NO-SERVICE 0 0
> 0
> S5 64000 on Login/ NO-SERVICE 0 0
> 0
> S6 64000 on Login/ NO-SERVICE 0 0
> 0
> S7 64000 on Login/ NO-SERVICE 0 0
> 0
> S8 64000 on Login/ NO-SERVICE 0 0
> 0
> S9 64000 on Login/ NO-SERVICE 0 0
> 0
> S10 64000 on Login/ NO-SERVICE 0 0
> 0
> S11 64000 on Login/ NO-SERVICE 0 0
> 0
> S12 64000 on Login/ NO-SERVICE 0 0
> 0
> S13 64000 on Login/ NO-SERVICE 0 0
> 0
> S14 64000 on Login/ NO-SERVICE 0 0
> 0
> S15 64000 on Login/ NO-SERVICE 0 0
> 0
> -- Press Return for More --
> S16 64000 on Login/ NO-SERVICE 0 0
> 0
> S17 64000 on Login/ NO-SERVICE 0 0
> 0
> S18 64000 on Login/ NO-SERVICE 0 0
> 0
> S19 64000 on Login/ NO-SERVICE 0 0
> 0
> S20 64000 on Login/ NO-SERVICE 0 0
> 0
> S21 64000 on Login/ NO-SERVICE 0 0
> 0
> S22 64000 on Login/ NO-SERVICE 0 0
> 0
> W24 1536K off Netwrk IDLE 0 0
> 0
> ts-001> exit
>
>