> Ok.. here's whats up..
>
> so I looked over the DB-25 specs, and the rj45 plug specs in the
> hardware manual for my OR. I then ended up doing this:
>
> black on 3
> green on 4
> red on 5
> yellow on 6
>
> this didn't work, so I decided to flip it around.. THAT DIDN'T WORK
> EITHER.
It depends on the other end of the wire and how the OTHER connector is
crimped. It may be BACKWARDS from what you need.
>
> Does anyone know what may be going wrong? I got the OR set in console
> mode, and the terminal set to 9600 bps, 8N1 and vt300 decoding.
>
> Thanks
> Jacob Suter
>
>
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger 713-772-6690 jake@ams.com
Advanced Medical Systems, Inc. jake@uh.edu
8300 Bissonnet #400
Houston, Texas 77074 http://www.ams.com/~jake
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~