You didn't turn the modem on.... Notice the Modem Control: off
try set all modem on
save all
reset all
Later
Kelley
>
> Hi!
>
> I am a freshman, I apollogise for taking your attention with this
> e-mail but I need help and advices in some areas. I need to know why if
> I'm following all the steps for the asyn port configuration of ppp dial in
> in a portmaster 2E is not working?
> Livingston Web Site show the next result of this configuration
> letting us know how it should be but the answer I got are not the same. The
> right configuration is the next one:
>
> Command> show s1
> -------------- Current Status - Port S1------------------
> Status: IDLE
> Input: 9582 Parity Errors: 0
> Output: 3336 Framing Errors: 0
> Pending: 0 Overrun Errors: 0
> Modem Status: DCD- CTS+
>
> Active Configuration Default Configuration
> ------------------- ---------------------
> Port Type: Netwrk Netwrk (Dial In) (Security)
> Baud Rates: 115200 115200,115200,115200
> Flow Control: RTS/CTS RTS/CTS
> Modem Control: on on
>
> Interface: ptp2 (PPP,Routing,Compr (PPP,Routing,Compress)
> Mtu: 0 1500
> Async Map: L:00000000 R:00000000 00000000
> Dial Group: 0
> Command>
>
>
> What I get is this, please notice the differences in " interface"
>
>
> ----------------------- Current Status - Port S1 ---------------------------
> Status: USERNAME
> Input: 72 Parity Errors: 0
> Output: 126 Framing Errors: 19
> Pending: 0 Overrun Errors: 0
> Modem Status: DCD- CTS+
>
> Active Configuration Default Configuration
> -------------------- ---------------------
> Port Type: Netwrk Netwrk (Dial In) (Security)
> Baud Rates: 115200 115200,115200,115200
> Flow Control: RTS/CTS RTS/CTS
> Modem Control: off off
>
> Interface: Unassigned (PPP,Listen) (PPP,Quiet)
> Mtu: 0 0
> Async Map: L:00000000 R:00000000 00000000
> Dial Group: 0
>
> Tanks...
>
>
> @}-,-`-- @}-,-`-- @}-,-`-- @}-,-`-- @}-,-`-
>
>
>