On Wed, 13 Aug 1997, Marty Likier wrote:
> >> The PM3 can handle data-over-voice isdn calls over ct1. Does the
> >> originating unit have the ability to initiate a isdn d-o-v call?
> Yes. If you set location "name" voice on, this will force a 56K d-o-v call.
> Or if you attach to an interface try, at&n55dtXXXXXXX, where XXXXXXX = the
> dialed number.
As reported several times to livingston support with no response
(I was on beta test for DOV support for several months):
- ---
at&n55dt4142000
Dialing...
Call Terminated - Unknown 0x39 (57)
NO CARRIER
- ---
303-414-2000 is configured trunk-side CT1 on a pm-3 w/ ComOS 3.7,
and I am dialing from on PM-2e with a 5BRI card. That channel can
receive calls fine, and call PRI or BRI lines just fine. Previously,
(in beta) I'v had successful call completions, but never get any
data thru the call, and eventually it hangs up. Now it won't even
complete the call.
> Marty Likier
> marty@livingston.com
- --
David Denney | D i m e n s i o n a l C o m m u n i c a t i o n s |
daud@dimensional.com | Shell & PPP * $25/mo 33K/56Kbps * $50/mo 64K ISDN |
303.285.INET voice | http://www.dimensional.com/ info@dimensional.com |
888.3.DIMCOM tollfree | fast reliable internet access for home and business |
protect your freedom, while you still can, finger me for PGP key, use it!
-----BEGIN PGP SIGNATURE-----
Version: 2.6.3i
Charset: noconv
iQCVAwUBM/ILHciwPjKgqwGVAQFwaQP+KfeOBy++xb3FTRr8u3r1FqtMUwUNvb5E
U8fkxgHT5jAmygQUrsaHNlju55A820Uc6w8j803eNMok8eHhBLGiAnZiaTMrh04E
ERqdUj1KF7pGWfy3dyWCiIp8Z2BZxyirv6Donrn6Du0Vn42qxOGWESsTB8cTVfzk
QQakIFvp9/M=
=lIZ1
-----END PGP SIGNATURE-----