> I have an ISDN client using a Ascend P50 dialing in a RNS NetHopper BRI.
> Presently, everything works perfectly. I want to move him over a 5 BRI PM2
> card. When the P50 dials in the PM2, It gets auth and the LAN session goes
> up. From the terminal server screen of the P50, I can ping and traceroute
> anywhere on the net but when I do that from another workstation behind the
> P50, it doesn't work beside a few adresses including the P50, the PM2 and
> the framed address.
Sounds like a routing issue.
> The exact same setup works perfectly well with the NetHopper. On the P50,
> I created anoter connection profile identical to the first one exept for
> the dial number and the IP option. The NetHopper profile is configured for
> system based routing and the PM2 profile is for interface based routing.
> The "rem addr" is alson changed between two tries. Since everything works
> from the P50 but not on its network, I guess it has something to do with
> routing and/or the the "LAN adrs", "WAN Alias" or the "IF adrs" settings.
Definitely.
> Can someone who has a working setup like that share some info with me. The
> P50 is running 4.6c and the PM2 3.5.1b17. Here's my radius attributes
> (from Radius NT on Access) for this user.
You need to manually delete the routes in the p 50 and the Pm that point
to that p 50. THen double check your routes. Make sure you use and
understand the slash notation needed for the P 50. For example, a netmask
of 255.255.255.248 is a /29.
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger 713-772-6690 jake@ams.com
Advanced Medical Systems, Inc. jake@uh.edu
8300 Bissonnet #400
Houston, Texas 77074 http://www.ams.com/~jake
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~