Brand new OR-M
Using a USR 33.6 PCMCIA (model SP1336)
shut down the router insert card power the router back up
Modem dials ... Leave it sit or power it off and power on later S1
doesn't won't re-configure itself.
S0 works like a champ with the system inits and the supplied modem cable.
Run it up in diagnostic mode and it recognizes the modem, even gives the
correct part number, but it won't set it as configured.
Talked to Rob at support and since S0 worked we figured heck it's a bad
card......
New card (same type) same MO. Worked twice this time and then it won't
stay configured.
As long as the card is in S0 won't dial so it's obviously recognized at the
OS level in some capacity.
That's it I'm outa here, nickel beer and bat night down the street....
Did Livingston hire Art Modell to make the OR-M's, this one just quits
working....:-) Ha at least it didn't pack up and leave on it's own..
Later...
David Davies
Director, Internet Services
Buckeye Internet Services, Ltd.
http://www.buckeyeweb.com
"Through the modem, past the NAP, around the World, nothing but Net...."
-------EXPANSION ONLY--------BRING BERNIE BACK TO CLEVELAND--------