>
> This is from Livingston Documentation:
>
> The modem table can only be modified and applied
> form the prompt, not from PMconsole.
>
> To change a modem profile you have to delete the
> profile and then add it.
>
> Having had to handle both of these issues recently, Id like to know
> when/IF Livingston is going to 1) allow pmconsole to set modem for a port,
> 2) allow modem modifications, rather than an add/delete. It is quite
> inconvenient as it is, and discourages me from even using the modem
> settings.
>
> Both issues could be solved without changing ANYTHING in the pm code
> itself, just in pmconsole (I bet).
You lose that bet. We'll be looking at integrating the modem table into
the next PMconsole, once we get all the PM3, OSPF, BGP, and other stuff
that isn't there now into it.
> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
> Jake Messinger 713-772-6690 jake@ams.com
> Advanced Medical Systems, Inc. jake@uh.edu
> 8300 Bissonnet #400
> Houston, Texas 77074 http://www.ams.com/~jake
> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
>
andy
++++
In Redmond, no one can hear you scream ...
My opinions, of course, are my own, unless they were given to me by my
employer.
Andrew Doolittle - Sr. Engineer Livingston Enterprises
email: andy@livingston.com vmail: (800)458-9966
smail: 4464 Willow Road, Pleasanton, CA 94588