Weird ORU->PM2 Problems

Chris Britton (brit@labyrinth.net)
Sun, 13 Jul 1997 17:55:19 -0400

I've having some weird problems getting a stable connection between our
PM2 and an ORU that our customer has. It always complete the first half or
the MLPPP coonnection just fine but for some unknown reason the second call
always want to go out as a CSV call (56k). This doesn't work. There have
been a few times it's worked right, but very few. Here are the configs on
the ORU and PM2 both running 3.5.1b17.

-------------------- Current Status - ISDN Port S1 ------------------------
Status: ESTABLISHED
Input: 19626 Abort Errors: 0
Output: 51685 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0
Modem Status: DCD+ CTS+ TELCO+ NT1+ Disconnect:

Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Netwrk (Dial Out) (Security)
Line Speed: 64000 64000

Remote Host: pm1.labyrinth.net pm1.labyrinth.net
Netmask: 255.255.255.224 255.255.255.224
Interface: ptp3 (PPP,Routing,VJ-Comp,Multilink)
Mtu: 1500 1500
Dial Group: 2
SPID: 304296xxxxxxxx
Directory No: 304296xxxx

Before dialing in

--------------------- Current Status - ISDN Port S2 ------------------------
Status: IDLE
Input: 0 Abort Errors: 0
Output: 0 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0
Modem Status: DCD- CTS+ TELCO+ NT1+ Disconnect: No User Responding

Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Netwrk (Dial Out) (Security)
Line Speed: 64000 64000

Remote Host: pm1.labyrinth.net pm1.labyrinth.net
Netmask: 255.255.255.224 255.255.255.224
Interface: Unassigned (PPP,Routing,VJ-Comp)
Mtu: 0 1500
Dial Group: 2
SPID: 3042961xxxxxx
Directory No: 304296xxxx
While dialing in

--------------------- Current Status - ISDN Port S2 ------------------------
Status: CONNECTING
Input: 0 Abort Errors: 0
Output: 0 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0
Modem Status: DCD- CTS+ TELCO+ NT1+ Disconnect: No User Responding

Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Netwrk (Dial Out) (Security)
Line Speed: 56000 64000

Remote Host: pm1.labyrinth.net pm1.labyrinth.net
Netmask: 255.255.255.224 255.255.255.224
Interface: Unassigned (PPP,Routing,VJ-Comp)
Mtu: 0 1500
Dial Group: 2
SPID: 304296xxxxxx
Directory No: 304296xxxx

Location: isp Type: Automatic
Destination: pm1.labyrinth.net Netmask: 255.255.255.224
Protocol: PPP Options: Routing, VJ-Comp, Multilink
Group: 2 Max Ports: 2
Idle Timeout: 0 seconds High Mark: 0 bytes
Mtu: 1500 Async Map: 00000000
Username: xxx Password: xxxxx
Telephone: 461

And here's what it does to the port on our PM2

--------------------- Current Status - ISDN Port S13 ------------------------
Status: IDLE
Input: 0 Abort Errors: 0
Output: 0 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0
Modem Status: DCD- CTS+ TELCO+ NT1+ Disconnect: Call Rejected

Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Login/Netwrk Login/Netwrk (Dial In) (Security)
Line Speed: 56000 64000

Terminal Type:
Dial Group: 0
SPID: 11296xxxx
Directory No: 296xxxx

And finally I'll include their radius entry

xxx Password = "xxxxxxxxxxxxx"
User-Service = Framed-User
Framed-Protocol = PPP
Framed-Address = "208.11.90.193"
Framed-Netmask = "255.255.255.224"

-----------------------------------------------------------------------
Labyrinth Solutions Inc. Chris Britton
Systems Manager P.O. Box 434
brit@labyrinth.net Morgantown, WV 26507