Couldn't configure attach operation

Gene Imes (ebi2@ozob.net)
Wed, 9 Jul 1997 19:42:18 -0500 (CDT)

I have a router console port and a mux console port connected to C0 on two
different PM3s. Since upgrading to b20 I can't attach to them:

t1> at c0
Couldn't configure attach operation
t1>

t1> sh c0
----------------------- Current Status - Port C0
---------------------------
Status: USERNAME
Input: 0 Parity Errors: 0
Output: 30 Framing Errors: 0
Pending: 0 Overrun Errors: 0
Modem Status: DCD- CTS+

Active Configuration Default Configuration (* = Host
-------------------- --------------------- Can
Override)
Port Type: Login Login/Netwrk (Dial In) (Security)
Login Service: PortMaster PortMaster
Baud Rates: 9600 38400,38400,38400
Databits: 8 8
Stopbits: 1 1
Parity: none none
Flow Control: RTS/CTS RTS/CTS
Modem Control: off on
Hosts: default

Terminal Type:
Login Prompt: $hostname login:
Dial Group: 0

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Gene Imes http://www.ozob.net
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~