> Support,
>
> OK folks, I'm runnning CT-1 and using the 20' cables out of the box
> supplied with the PM-3. Should we use different cables, (not that I think
> we should by the way).
Hey lets not start a panic! Ask Livingston first before
suggesting that we NOT use the cables in the box.
This discussion has come up before about using cat 5 for serial
connections but I dont believe specifically about rj-48
Regarding serial. Afer that discussion, I did A LOT of testing on cat 5
passing serial data to printers at 9600 baud over varying lengths versus 8
conductor 4 pair shielded wire. I found that I had NO problems at 9600
baud.
Due to the nature of t1 connections, I would think that you would need
to use a properly speced cable for it. I do NOT think Livingston would
ship a $20,000 product with the wrong cables.
Just my 9 cents.
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger 713-772-6690 jake@ams.com
Advanced Medical Systems, Inc. jake@uh.edu
Houston, Texas http://www.ams.com/~jake
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
One should not be measured by his/her ascii art ability.