i've got a problem with an or-st running ComOs 3.5L and a NetGw Router.
When the Netgw connects to the Officerouter, only the message
"ppp_recv (S2): Bad PPP Adress" appears on the console of the or.
( When packets are coming in )
On the IP layer the connection is dead.
The same thing happens, when the location on the officerouter
( to call the netgw )is set to "compression off"
and the or inits the connection.
But the netgw does not make VJ-Compression.
When compression is on, everything is fine.
Any ideas, what i'am doing wrong.
Here is the location and the user enty:
seca> sh user ppp
Username: ppp Type: Dial-in Network User
Address: x.x.x.1 Netmask: 255.255.255.0
Protocol: PPP Options: Quiet, Compression
MTU: 1500 Async Map: 00000000
seca> sh loc ppp
Location: ppp Type: On Demand
Destination: netgw Netmask: 255.255.255.0
Protocol: PPP Options: Quiet, Compression, Multilink
Input Filter: internet.in Output Filter: internet.out
Group: 1 Max Ports: 1
Idle Timeout: 2 minutes High Mark: 0 bytes
Mtu: 1500 Async Map: 00000000
Username: seca Password: secret
Telephone: xxxxxx
Thanks in advance
Volker Klau