> Added a PM3 with 2pri today. Have 3 pm2e's on 1st class c and I
> am out of host ip's on it so added PM3 on new 2nd class c.
> Having no luck figuring out the routing. Have a cisco 2501
> with the ethernet port set to first class c x.x.48.1 host ip and
> secondary ip on second class c x.x.49.1 host ip
>
So you've already done
#conf t
(config)#in e 0
(config-if)#ip address x.x.49.1 255.255.255.0 sec
(config-if)#^Z
#wr mem
> Besides all the obvious things set in pm3 I have set ether0
> x.x.49.10 gateway x.x.49.10 netmask 255.255.255.0
^^^^^^^^^^^^^^^^^
This is one of those obvious things :) gateway should be x.x.49.1 as it
is the secondary address of ether0 on the crisco
>
> It is obvious that more is needed and I'm asking for help now.
> Dial in and log in as !root I can get to the whole world. PPP dials
> in and connects fine and authenticates users and has incoming packets
> from PC but no return route for the traffic so nothing works. I have a
> few dozen static IP's in use for the x.x.48.0 group and I need any one of
> them dialing into any of the portmasters on either x.x.48.0 or x.x.49.0 to
> work.
>
> Help by way of instructions or reference material would be
> appreciated.
> Many thanks.
>
> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> Don Lewis Jackson, Tennessee
> dlewis@erc.jscc.cc.tn.us
> = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
>
==============================================================
Tim Flavin Internet Access for St Louis & Chicago
Internet 1st, Inc Toll Free Sales & Support 800-875-3173
http://www.i1.net For more information email info@i1.net
==============================================================