i have problems with an officerouter running
ComOs 3.4.2Lc1.
The officerouter get called by a NetGw router.
Here is a dump of the incoming call:
seca> set console
seca> set debug 0x51
Setting debug value to 0x51
seca> Received LCP_CONFIGURE_REQUEST on port S2 of 12 bytes containing:
01 f1 00 10
01 04 = mru 1500
08 00 = compression settings
07 02 = compression settings
08 02 = compression settings
03 04 c0 23 = netgw needs pap
Sending LCP_CONFIGURE_NAK to port S2 of 9 bytes containing:
03 f1 00 09
03 05 c2 23 05 = officerouter says chap
Sending LCP_CONFIGURE_REQUEST to port S2 of 14 bytes containing:
01 01 00 0e
05 06 6b 19 bf 0f = magic number
03 04 c0 23 = officerouter requested pap
Received LCP_CONFIGURE_REQUEST on port S2 of 12 bytes containing:
01 86 00 10
01 04 = same as above
08 00
07 02
08 02
03 04 c0 23 = netgw again try pap
Sending LCP_CONFIGURE_NAK to port S2 of 9 bytes containing:
03 86 00 09
03 05 c2 23 05 = officerouter again answers chap
Received LCP_TERMINATE_REQUEST on port S2 of 12 bytes containing:
05 b0 00 10
41 75 74 68 20 66 61 69 6c 75 72 65 = "Auth failure"
Sending LCP_TERMINATE_ACK to port S2 of 16 bytes containing:
06 b0 00 10
41 75 74 68 20 66 61 69 6c 75 72 65 = "Auth failure"
and click.
The setup of the officerouter is: PAP on, CHAP off
But why he does the chap requests ????
Hope somebody could help me out
Greetings,
Volker
+----------------------------------------------------------------------+
+ Volker Klau EMail: volker@microdata.de +
+ M I C R O D A T A Phone: +49-461-1 28 20 +
+ EDV-Beratung & Systemhaus FAX : +49-461-2 70 90 +
+ XLink-PoP/Flensburg +
+ Mommsenstr. 14 - D-24943 Flensburg http://www.microdata.de +
+----------------------------------------------------------------------+