> > On Fri, 28 Mar 1997, Jake (not the snake) Messinger wrote:
> >
> > > New command line option to clone ports in 1 move. For example, lets say I
> > > set up port s0 exactly how I need it. Then I want to be able to type:
> > >
> > > clone s0 all
> > >
> > > Similarly with PMCONSOLE, I want to have a clone to ALL feature.
> >
> > For what it's worth, I sincerely agree with Jake. Having just recently
> > had to set up 5 consecutive pm11s all with the exact same port
> > configuration, I was thinking to myself "it sure would be nice to have
> > clone work for all ports".
>
> Long time ago I spent some time typing out our entire config, since then all
> I need to do to configure a new box is:
> - set dip switches, connect ethernet, plug in terminal
> - power on the box, log in, set ether0 address and netmask
> - telnet to the box and do a couple of copy&paste's
> This whole procedure takes less than 5 minutes.
only a couple.. ;)
Is it just me or did trying to use Win95 PMconsole and the clone button
only do pairs of modems... s0/s1, s2/s3 etc....? Just curious...*sigh*
lots of copying and pasting...
Now if our telco will just get the PRI working hehe...
-- Aloha,Sherwood