In other words, if the EXACT switch type isn't listed then
the PM3 won't work?
Thanks,
Ed
> Once upon a time Technical Support shaped the electrons to say...
> > We use the European standard here, what signalling protocol does the E1
> >interface require? (R2, C7 etc.) Also are the Euro standard PM3's available
>
> ISDN Switch Compatibility
>
> 5ESS
> DMS-100
> NET5
> 1TR6
> NTT
> KDD
> NI2
>
> ISDN Switch Encoding
>
> AMI and B8ZS (T1)
> AMI and HDB3 (E1)
>
> ISDN Switch Framing
>
> ESF and D4 (T1)
> CRC4, FAS (E1)
>
> Dial-up Connections
>
> 64/56Kbps synchronous
> 64/56Kbps asynchronous with V.120 rate adaption
> Analog modem (with AT command emulation)
>
> Channelized T1/E1
>
> Leased line and Frame Relay
>
> That's from the online datasheet.
>
> -MZ
> --
> Livingston Enterprises - Chair, Department of Interstitial Affairs
> Phone: 800-458-9966 510-426-0770 FAX: 510-426-8951 megazone@livingston.com
> For support requests: support@livingston.com <http://www.livingston.com/>
> Snail mail: 4464 Willow Road, Pleasanton, CA 94588
>