>For Boca 28.8 v.34 modems the following string is the only one that we have
>found that will work reliably with any other modem brand and/or speed.
>
>Type the following commands at the portmaster prompt:
>
>> add modem boca-v34 "Boca v.34" 115200 "AT&F&K3&c1&d2v1x4s0=1l3&W\r^OK"
>
>> save all
>
>Then configure the ports to use the modem init string:
>
>> set s1 modem boca-v34
>
>-or-
>
>> set all modem boca-v34
>
>> save all
>
>> reset all
>
This was the reply to some other post. But makes me think:
Could I use this to setup the modems ready for dialin's connexions on PM-2ERs ?
(Is there a another - simple - way to reset all of the modems linked to my
PM-2ERs ? )
Sincerely,
Eric
Eric SALOME <salome@certix.worldnet.net>
-------------------------------------------------------------
Societe CERTIX Sarl tel : +33 (1) 48.03.49.15
32, bd de Strasbourg gsm : +33 09.66.79.50
75010 PARIS fax : +33 (1) 42.41.28.07
-------------------------------------------------------------
Conseil et Ingenierie en Informatique