-Dave Andersen
Lo and behold, Matthew N. Dodd once said:
>
>
> I've beaten my brains to find a solution, but it eludes me so I thought
> I would bounce it around here. I'm probably overlooking something simple,
> but like most problems, its hard to see the whole thing unless you step back.
>
> Anyhow, this morning the terminal server started issuing "Access Denied"
> messages to shell logins. I am using the Radius service prefix (S/P) to
> start network logins, and the username alone to start shell logins.
>
> Radius is working properly and sends an ACK to the terminal server as it
> should. It doesn't appear to be a host problem, as the terminal server
> doesn't generate any traffic to the rlogin host before it gives "Access
> Denied".
>
> Like I said, its probably something simple. Anyhow, here is my port
> config.
>
> ----------------------- Current Status - Port S24 ---------------------------
> Status: IDLE
> Input: 0 Parity Errors: 0
> Output: 0 Framing Errors: 0
> Pending: 0 Overrun Errors: 0
>
> Active Configuration Default Configuration (* = Host
> -------------------- --------------------- Can Override)
> Port Type: Login/Netwrk Login/Netwrk (Dial In) (Security)
> Modem Stat: READY ACTIVE
> Databits: 8 8
> Stopbits: 1 1
> Parity: none none
> Flow Control: RTS/CTS No Xon/Xoff*,RTS/CTS
> Modem Control: on on
> Hosts: default
>
> Terminal Type: vt100
> Login Prompt: ts1 login:
> Autolog Name:
> Dial Group: 0
> Login Message: Welcome to InterSurf Online, Inc.
>
> -----------
>
> Thanks.
>
> | Matthew N. Dodd | winter@jurai.net | http://www.jurai.net/~winter |
> | Technical Manager | mdodd@intersurf.net | http://www.intersurf.net |
> | InterSurf Online | "Welcome to the net Sir, would you like a handbasket?"|
>
--
angio@aros.net Complete virtual hosting and business-oriented
system administration Internet services. (WWW, FTP, email)
http://www.aros.net/ http://www.aros.net/about/virtual/
"She totally confused all the passing piranhas"