Re: ISDN on port s28 of a PM2e ---> to Cisco 2503 ISDN..

Erik Bos (erik@xs4all.net)
Mon, 16 Oct 1995 13:14:14 +0100

>We have a Motorola uta220k hooked to port28....the cisco 2503 is set-up
>at the other end.

>How should the port be set-up and how do we set-up an entry in RADIUS.

>When we try to telnet from the Cisco to the PM2e the CISCO isdn debug
>says we connect
>to the other spid number on the uta220k the light flashes on the B
>channel....but it immediatly disconnects. We get no prompt for a login or
>password?

AFAIK it's not possible to do this as cisco's ios doesn't support x.75.