Re: Initialising modems (fwd)
Brian 'MegaZone' Bikowicz ((no email))
Fri, 13 Oct 1995 12:48:09 -0700 (PDT)
Once upon a time Frank Heinzius shaped the electrons to say...
>attach Sx where x is the desired port
>
>Then you may configure the modem. Stop the attach by sending the
>telnet escape character. If you are connected via telnet to the PM,
>enter the telnet escape character and type "send escape".
>
>Be careful! Never attach to a port without a device connected or
>powered on. This _may_ lead to PM lockups.
IMPORTANT NOTE:
"attach" is officially unreleased, unsupported, and undocumented. And it is
*known* to have several *major* bugs.
Use it at your own risk.
In other words, if you hose your portmaster with it, we can't help.
We strongly discourage its use.
-MZ
--
Livingston Enterprises Technical Support
Phone: 800-458-9966 FAX: 510-426-8951
support@livingston.com <http://www.livingston.com/>
6920 Koll Center Parkway #220, Pleasanton, CA 94566