Routing Table Flags UPDATED: August 26, 1999 SUMMARY: These are the definitions for the flags shown in Lucent Remote Access products' routing tables. Routing tables can be displayed with the following commands: show route show ipxroute Flag Definition           Description ---------------------------------------------------------- H   Host      Represents a route to 1 ip address N   Network   Represents a group network or range of ip address. L   Local     Represents an interface which is directly connected to the PortMaster. S   Static    Route was manually added.  The default route                is set as a static route using the ip gateway. D   Dynamic   The route was learned via RIP ver.1 C   Changed   Route recently changed but has not been               propagated via RIP O   Obsolete  Route is Obsolete, marked for deletion.