------=_NextPart_000_0002_01BF5233.E7E02760
Content-Type: text/plain;
charset="Windows-1252"
Content-Transfer-Encoding: 8bit
You don't need to change anything. If there is a modem-card (or more) in the
PM3, the selection of ISDN/Analog will be done automatically.
mfg
Martin Wallner (=mw=)
-----
ViP EDV-Dienstleistungs GesmbH e-mail 'hostmaster@vip.at'
Domänen-, IP- u. Userwartung ViP RIPE: WM355-RIPE
Stephensong. 1/4 InterNIC: WM327-ORG
1210 Wien Tel. +43 1 257 3317 Fax: Dw. 99
-----Original Message-----
From: owner-portmaster-users@livingston.com
[mailto:owner-portmaster-users@livingston.com]On Behalf Of Tony Pruitt
Sent: Wednesday, December 29, 1999 7:02 PM
To: portmaster-users@livingston.com
Subject: (PM) PM-3 sync ports
I am setting up a PM3 we got used. PMvision shows no sync ports but ISDN
ports are all there. All customers are dialin only and most are modem not
ISDN. How do you set the PM3 so all ports are for both modem and ISDN? Async
only shows C0 not other ports.
Thanks
Tony
------=_NextPart_000_0002_01BF5233.E7E02760
Content-Type: text/html;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
mfg
Martin Wallner (=3Dmw=3D)
-----
ViP=20
EDV-Dienstleistungs GesmbH e-mail=20
'hostmaster@vip.at'
Dom=E4nen-, IP- u. Userwartung =
ViP =20
RIPE: WM355-RIPE
Stephensong.=20
1/4 &nbs=
p; =20
InterNIC: WM327-ORG
1210=20
Wien &nb=
sp; &nbs=
p; =20
Tel. +43 1 257 3317 Fax: Dw. 99
------=_NextPart_000_0002_01BF5233.E7E02760-- - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive:-----Original Message-----
From:=20 owner-portmaster-users@livingston.com=20 [mailto:owner-portmaster-users@livingston.com]On Behalf Of Tony = Pruitt
Sent: Wednesday, December 29, 1999 7:02 = PM
To:=20 portmaster-users@livingston.com
Subject: (PM) PM-3 sync=20 portsI am setting up a PM3 we got used. PMvision shows = no sync=20 ports but ISDN ports are all there. All customers are dialin only and = most are=20 modem not ISDN. How do you set the PM3 so all ports are for both modem = and=20 ISDN? Async only shows C0 not other ports.ThanksTony