Re: (PM) 3.8.2c4

Mike@NetDotCom ("Mike@NetDotCom")
Tue, 28 Dec 1999 10:08:21 -0500

WINS Resolution is a major problem. We invariably have to disable it on
almost every customer's machine at some point. The kicker is that the
machine will connect fine a 100 times then fail until the change is made.
Worse is when it fails some of the times and the customer never calls, just
cancels.

Mike K

----- Original Message -----
From: Don Lashier <dl@newportnet.com>
To: <portmaster-users@livingston.com>
Sent: Tuesday, December 28, 1999 5:13 AM
Subject: Re: (PM) 3.8.2c4

> I've noticed that if the user has DHCP enabled in
> CP/NETWORK that the latest modem code pushes pushes
> them over the edge timing wise. Evidently the PM3
> times out before Windoze gives up on DHCP negotiation.
> Have them disable WINS resolution and see if that
> helps.
>
> Don
>
> On 12/28/99 at 8:54 AM Christian Schmit wrote:
>
> >Hi,
> >
> >I see the same here with 3.8.2c4. The comma trick doesn't help.
> >
> >Any tips?
> >
> >Christian
> >
> >At 07:07 PM 12/27/1999 , you wrote:
> >>I upgraded a few of our pm3's to 3.8.2c4 and since then customers with
> >>software based modems haven't been able to authenticate.You know what
they
> >>are LT Winmodems , Rockwell/Conexant 56k , etc.Anyone else experience
this
> >>yet? If so whats the fix.
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Don Lashier dl@newportnet.com
> Newport Internet http://www.newportnet.com/
>
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>