>After over a year of 50,667 and 49,333 bps connect speeds to 972-542-5454,
>on Christmas Eve to present I have experienced 28.8 connect speeds. This
>connect speed is indicated by a long, drawn out hand shake.
We upgraded the Motorola ModemSURFR to current firmware (07/02/98) and .inf
(03/12/99) levels without result.
Don, what happens when you use HyperTerm rather than DUN to establish the
connection to the PM3 modem pool?
Has anyone tried reverting to K56Flex on these modems for which that is
applicable?
thnx/ldv
At 04:13 AM 12/28/99 , Don Lashier wrote:
>I've noticed that if the user has DHCP enabled in
>CP/NETWORK that the latest modem code pushes pushes
>them over the edge timing wise. Evidently the PM3
>times out before Windoze gives up on DHCP negotiation.
>Have them disable WINS resolution and see if that
>helps.
>
>Don
>
>On 12/28/99 at 8:54 AM Christian Schmit wrote:
>
> >Hi,
> >
> >I see the same here with 3.8.2c4. The comma trick doesn't help.
> >
> >Any tips?
> >
> >Christian
> >
> >At 07:07 PM 12/27/1999 , you wrote:
> >>I upgraded a few of our pm3's to 3.8.2c4 and since then customers with
> >>software based modems haven't been able to authenticate.You know what they
> >>are LT Winmodems , Rockwell/Conexant 56k , etc.Anyone else experience this
> >>yet? If so whats the fix.
>
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>Don Lashier dl@newportnet.com
>Newport Internet http://www.newportnet.com/
>
>
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>