Re: (PM) bonding 2 bri's

Butch Kemper (kemper@tstar.net)
Thu, 16 Dec 1999 09:38:37 -0600

At 03:13 PM 12/15/1999 , you wrote:
>I have a customer that has two BRI's, and would like to take advantage of
>all four channels and dial into my PM3.
>
>I know someone spoke about the cisco ?? router that did this for them, was
>hoping someone on the list has done this (is doing this) and what are they
>using on the customer side to dial into the PM3 with two BRI's, bonding
>all channels.

I have done it with a PM2e and the 5BRI card. Given what I have seen on
the used equipment lists, you can put together a box that will do it for
less than $1,000.

Butch

TSTAR Internet, Inc | Making the Network Work
Marble Falls, TX | Serving Blanco, Burnet, and
830-693-6967 | Llano Counties

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>