Regards,
Alex
Leif Neland wrote:
> I have some remote systems with zyxel prestige 100 routers.
> I have given the systems fixed ip's both in location for dialing out, and in radius for dialing in.
>
> However, it seems the PM3 gets confused, when the remote system dials in. It looks like it still wants to route packets to the location and dial out, instead of using the already established route to the dialed in port.
>
> On other occations, I think the PM3 remembers the route to the dialin-port after the connection is terminated, and therefore does not dial out.
>
> Does this make any sense?
>
> I'm using OSPF. I currently use only one PM3, but can imagine even more trouble if/when I get the next PM3, as the call could very well come in on the PM3 which does not do the outcall.
>
> I think I'm running 3.8.x, at least not a 3.9.
>
> Would upgrading help?
>
> Any other ideas? Should I try not giving the dialin the same ip as when going out?
>
> Leif
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>