Re: (PM) Multiframe Sync

Krzysztof Adamski (kadamski@netsurf.net)
Wed, 15 Dec 1999 15:33:14 -0500 (EST)

I know it's the local loop, but which settings would cause so many
"Multiframe Sync" errors. Telco reports the line being clean. And up to now
it was.

K

On Wed, 15 Dec 1999, Don Lashier wrote:

> Telco local loop problems.
>
> Don
>
> On 12/15/99 at 1:46 PM Krzysztof Adamski wrote:
>
> >What is the "Normal" reason for this quantity of errors:
> >
> >purple> sh line1
> >---------------------- line1 - T1 Primary Rate ISDN ---------------
> >
> > Status: UP Framing: ESF Encoding: B8ZS PCM: u-law
> >
> > Receive Level: +2dB to -7.5dB
> >
> > Alarms Violations
> > ----------------------------- -----------------------------
> > Blue 2 Bipolar 0
> > Yellow 0 CRC Errors 4
> > Receive Carrier Loss 0 Multiframe Sync 90893
> > Loss of Sync 3
> >
> >purple> ver
> >Lucent PortMaster PM-3 ComOS 3.9b26
> >System uptime is 1 days 20 hours 35 minutes
> >
> >This is the last line in my pool, so not much complains from users, I'm
> >not sure I should worry or not.
> >The numbers have not changed in the last 4 hours, don't know if it was a
> >burst or steady increase.
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Don Lashier dl@newportnet.com
> Newport Internet http://www.newportnet.com/
>
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>