Re: (PM) Init-strings

keith@mail.telestream.com
Fri, 10 Dec 1999 09:09:54 -0800 (PST)

I get the following message on the win98 side when attempting to dial into
the pm3

Interpreted response: Connect
Connection established at 115200bps.
Error-control off or unknown.
Data compression off or unknown.
Remote modem hangup.

So how do I enable the proper error control and compression on the PM3.
Assuming this is indeed the problem. I would love a URL to an example
configuration for a basic 56k dial up.

Thanks.

Keith

On Thu, 9 Dec 1999 keith@mail.telestream.com wrote:

> Ok.. Looks like things are just fine.. But it's not doing something
> properly. Keep getting this message in the log file
>
> Port S3 succeed destination 0.0.0.0
> ppp_sync failed
>
> That doesn't look too good. The destination and the sync failed. I assume
> the sync failure is due to the 0.0.0.0 destination. Any comments would be
> greatly appreciated.
>
> Keith
>
>
>
>
> On Thu, 9 Dec 1999, Craig Baird wrote:
>
> > You shouldn't have to enter any init strings for the PM3 modems. I think
> > you can, but it's not a thing you would normally do like you would on a
> > PM2.
> >
> > Craig
> > Xpressweb Internet Services
> > bairdc@xpressweb.com
> > http://www.xpressweb.com
> >
> >
> > On Thu, 9 Dec 1999 keith@mail.telestream.com wrote:
> >
> > > I just had my new PRI installed and the telco testing went fine.
> > > I can dial into the things and the modem(s) respond.
> > > Just curious; shouldn't there be a need for me to enter in init strings
> > > for these modems somewhere or are they just all preconfiged to be kewl?
> > > Just using them for the normal 56k dial up stuff.
> > > Green as you can see. :)
> > >
> > > Unit -- PM3A-2T
> > > Modems -- MDM-56k-8
> > >
> > >
> > >
> > > Keith
> > >
> > >
> > > -
> > > To unsubscribe, email 'majordomo@livingston.com' with
> > > 'unsubscribe portmaster-users' in the body of the message.
> > > Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
> > >
> >
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>