Another Location:
Lucent PortMaster PM-3 ComOS 3.9b22
System uptime is 50 days 23 hours 46 minutes
This release is actually one of the first we dont have to reboot every 15
days.. The first PM3 is probably 75% of the time full (48Mod 2 CT1 AMI/D4)
and the second isn't always full, but its always in use (24 Mod 1 CT1
AMI/D4)
Don
UDNet
----- Original Message -----
From: "Tim Tsai" <tim@futuresouth.com>
To: <portmaster-users@livingston.com>
Sent: Tuesday, November 30, 1999 10:29 PM
Subject: (PM) PM3 spontaneous reboots
> Is anybody else seeing spontaneous reboots with 3.9b22 and/or 3.9b24?
>
> We have a group of 3 PM3's that's been rebooting randomly (generally will
> run for a few hours). I have the console connected in two of them and of
> course the last one that rebooted was the unconnected one.
>
> I am only seeing this in one location. 7 other PM3's in other locations
> (some in groups) and they've been working fine.
>
> <1% ethernet collision (each PM3 is connected directly to a Cisco switch)
> so I don't think that's the problem.
>
> It does appear that only fully loaded PM3's do this. I've moved the lines
> around to trace this down and I don't recall any box with only one PRI
> has rebooted.
>
> Dial-up only PM3's running OSPF and SNMP.
>
> Thanks,
>
> Tim
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>