Re: (PM) IP Blocks not being assigned to dial-ins
David Spiker (dspiker@dialnet.net)
Fri, 28 May 1999 11:58:23 -0500
Butch Kemper wrote:
>
> At 01:53 PM 5/27/99 , you wrote:
> >
> >I just recently added another PM3 into one of our POP's that already had
> >4 portmasters installed. However now anyone who dials into that
> >portmaster and is normally assigned a netblock via Radius, the
> >portmaster is not adding the netblock into it's OSPF routes. If they
> >call into another pm in the same group, the netblock is assigned and
> >shows up as a route, but the new PM only gives them the correct static
> >IP for the gateway but then nothing beyond a /32 shows up in the local
> >routing table. The PM does communicate with the rest of the machines via
> >OSPF, but won't insert any local routes beyond a /32 into the route
> >table.
> >Any ideas of what to check that would cause this behaviour? I'm at a
> >loss right now. The new PM is going in at the end of the group.
> >Thanks in advance.
>
> Make sure that "set user-netmask on" has been set on the new PM.
>
> Butch
> TSTAR Internet, Inc | Making the Network Work
> Marble Falls, TX | Serving Blanco, Burnet, and
> 830-693-6967 | Llano Counties
Doh, that fixed it.
Thanks...
This is what I get for not having java on my workstation.
Never saw that difference from the CLI
--
David Spiker
DialNet Internet Services
dspiker@dialnet.net
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>