PM3 with PRI dialing to a BRI tied to a Netgear RT328 ISDN router.
Thanks!
-Scott
> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On Behalf Of Thomas C
> Kinnen
> Sent: Monday, May 24, 1999 10:23 PM
> To: portmaster-users@livingston.com
> Subject: Re: (PM) Dialbacks - what do these messages indicate?
>
>
> "PmUser, Resident Lackey" wrote:
> >
> > howdy!
> >
> > Thanks for the reply...
> > I was wondering if you had some hints as to what protocols the
> ISDN (PRI)
> > line might be thorwing out cauing my BRI to choke?
> >
> > I meet with my telco rep tomorrow morning and would like to
> have as much as
> > info as possible to give to them so we can get this addressed asap.
>
> Here's one piece of information that is missing. What is plugged into the
> BRI at the other end?
>
> --
> Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
> [RADIUS Test Engineer] - LUCENT Technologies RABU
> "All of the opinions stated above are my own and not my employer's,
> unless they were given to me by my employer"
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>