In our continued quest to establish a dedicated ISDN connection from our PM3 to a router - in this case a netgear RT328 - we're now seeing this:
pm1> dial 1edi -x
Starting dial to location 1edi using S40
sendthem (CRN3309459487)
S40: Sending Call Request - 3309459487
expect (=DCD=)
S40: Received Proceeding
S40: Received Disconnect Cap Not Implemented (B17 ID:8029)
S40: Sending Disconnect Request
S40: Received Clear Conf (B17 ID:8029)
S40: Redialing at alternate 56Kbps rate
S40: Sending Call Request - 3309459487
S40: Received Proceeding
S40: Received Disconnect Cap Not Implemented (B17 ID:8029)
S40: Sending Disconnect Request
S40: Received Clear Conf (B17 ID:8029)
I'm a bit too green on the lingo to decipher this message, someone indicated that it was a telco provisioning error. Could someone shed some light?
Basically I'm going from a PRI (it is two way) connected to my PM3 to a BRI connected to my BRI at my house (for testing purposes).
Any info would be helpful. Thanks!
-Scott
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>