[You should leave who the original poster was here]
I think Todd Jagger <tjagger@overland.net> said:
> > I've ipaliased all the necessary DNS and mail boxes to with their old ip
> > numbers, and our upstream provider is routing the old class c's to the
> > portmaster, but I've yet to figure out what the magic routing config is on
> > the portmaster so the net can see the old ip's. I've tried adding some
> > static routes and such but no joy.
> >
> > Has anyone done this? Can it be done? Any help is appreciated.
>
> Well, I've finished renumbering our whole net a few weeks ago (but on
several PM3's, not PM2's), and I've got no troubles at all with this. I'd
the curiousest situations, but the PM's handled them all.
PM3s with which ComOS? Must be v3.8+ so realize that this is NOT
available to PM2s. so your current solution is not viable.
You could put some NAT box in to translate it for the PM2s but what a
pain!
-- Aloha from Paradise,Sherwood Got Clue? If so: ISPF! The Forum for ISPs by ISPs, <http://www.ispf.com>
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>