Re: (PM) Caller ID

DAJ JAD (starisp@hotmail.com)
Wed, 19 May 1999 04:33:09 PDT

So are you saying that if the line is analog then radius cannot detect
Caller-id of users even though the telco has enabled the caller-id feature.
But if we connect a Caller-id capable phone to the same analog line, we can
see the caller's number.

If this is the case than is there a patch or code that is available or can
be written to overcome this limitation.

We are using RadiusNT with PM2e and Pm25's with Compaq 4000 modem racks.

Doug

>From: Thomas C Kinnen <tkinnen@livingston.com>
>Reply-To: Thomas C Kinnen <tkinnen@livingston.com>
>To: portmaster-users@livingston.com
>Subject: Re: (PM) Caller ID
>Date: Tue, 18 May 1999 18:48:13 -0700
>
>Raul Funes wrote:
>
> > Is there any command to show the caller-id of users connected to PM. I
>tried
> > to log it to the radius database but your session needs to be of "type"
>ISDN
> > as I understand and we are not using that type so I am trying to see if
>I
> > can use something like >>sh m3 caller-id on PM3.
>
>If your incoming lines are PRI and your telco is providing it the
>Calling-Station-Id should be present in the RADIUS packet regardless if it
>is an ISDN or Analog call.
>
>--
>Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
>[RADIUS Test Engineer] - LUCENT Technologies RABU
>"All of the opinions stated above are my own and not my employer's,
>unless they were given to me by my employer"
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>