-----Original Message-----
From: James Courtier-Dutton [SMTP:dutton@livingston-ent.co.uk]
Sent: Tuesday, May 18, 1999 6:09 PM
To: jomor; portmaster-users@livingston.com
Subject: RE: (PM) dial-out IP modem pooling
Hello
Works fine, just set them all for the same port number and the PM will use
them as a pool of modems.
Cheers
James
> Subject: RE: (PM) dial-out IP modem pooling
>
>
> I've managed to config one port and dial out successfully with ISDN and
> analog following several calls to MCI. It seems one (or more) of their
> switches had decided to busy-out all 23 b channels for 5 days and that's
> probably why it wouldn't dial out.
>
> Is it possible to configure a pool of several modems for dial-out access
> via the same telnet port? I'd like to avoid having to configure each
> "DialOut-IP" client uniquely and assigning each of them a specific modem
> port.
>
> `Thanks for your help ...jgm
>
>
> -----Original Message-----
> From: Thomas C Kinnen [SMTP:tkinnen@livingston.com]
> Sent: Sunday, May 16, 1999 3:19 PM
> To: Joe Moore; Mail List - Portmaster Users
> Subject: Re: (PM) dial-out IP modem pooling
>
> > I've tried at&n0, at&n10, at the suggestion of a Lucent tech, and
at&n56
> > (which I found in the archive of this list) and then an atdt with the
>
> &N10 or &N1? Also &N56 makes an ISDN call.
>
> Try:
>
> AT&N0dt <phone number>
> AT&N1dt <phone number>
>
>
> Have you verified you have dial out support on the PRI? Many times
unless
> you ask for dial on on the PRI the phone company will only enable dial in
> if
> you tell them it's for a NAS.
>
> Also what does an ISDN debug show when you try to dial?
>
>
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>