> On Mon, 17 May 1999 jp@sugar.midcoast.com wrote:
[snip]
> > Once you get it in and running, you'll find that the /etc/services file
> > will prevent things from logging in. It setup radius's ports to be in the
> > 1800's range instead of the 1600's range, which seems sort of weird to me.
> > Comment those out and put it in the way you like it, and you'll be all
> > set.
>
> The 1812 and 1813 ports are the current RADIUS RFC ports and you should
> use them as long as your RADIUS clients support these ports (or allow you
> to choose which ports to use). The 1645 and 1646 ports are still very
> much in use, but the RADIUS police are trying to phase them out.
So true... 8) since port 1645 was assigned to another service 1812 was
picked for RADIUS... Now if you're moving over to the 1812 a few things to
consider/remember
1) NAS must be able to do 1812 as Richard says.. IOW ComOS 3.8+
2) don't forget your /etc/services
3) don't forget to have your RADIUS server set to 1812
http://www.livingston.com/tech/docs/radius/introducing.html
is something good to read...
-- Aloha from Paradise,Sherwood Got Clue? If so: ISPF! The Forum for ISPs by ISPs, <http://www.ispf.com>
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>