> This worked well, but I disabled it after I discovered the PM2e30 had the
> same IP address assigned to 2 ports. I let the IP addresses be assigned by
> the portmasters ("Assigned Address: " in global config menu of PMConsole).
> This worked well for some time, till today. I found the same IP address
> assigned to 2 ports. I reset both the ports, but the PM25 continued to
> assign the same IP address to two ports. It appeared as though the PM was
> unable to track assigned IPs.
Same user or Differet user?
Are the users using a DEFAULT profile or a custom profile?
Are you sure Fall-Though is not mucking things up?
Are the users set to Assigned or Negotiated?
What does the RADIUS profile look like?
-- Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com> [RADIUS Test Engineer] - LUCENT Technologies RABU "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>