Re: (PM) dial-out IP modem pooling

Thomas C Kinnen (tkinnen@livingston.com)
Sun, 16 May 1999 09:23:05 -0700

Joe Moore wrote:
>
> I'm trying to place a modem call. The PM3 has a PRI on line 0 and a CT1 on
> line 1. I was told that I can only use the first 23 channels (s0 thru s22)
> since they are assigned to line 0. Right now I'm just trying to get s10 to
> work. Ideally I'd like to pool 5 or 6 modems for dialout, preferably on the
> same telnet port.

Are you issuing the AT Command to put the port in Analog mode? The ports
dial out using ISDN by default.

-- 
Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
[RADIUS Test Engineer] - LUCENT Technologies RABU
"All of the opinions stated above are my own and not my employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>