> Is it possible to force Portmaster to use a certain MTU value for a
> dial-in port? I've used the commando "set all mtu 576", and altough
http://www.livingston.com/tech/docs/command/async.html#35960
That is only for Hardwired network ports. You need to set it in the users
profile. *BUT* If the user dialins in using PAP the MTU is negotiated
during LCP before authentication so a RADIUS entry will have no affect.
-- Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com> [RADIUS Test Engineer] - LUCENT Technologies RABU "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>