Re: (PM) Portmaster 2e and RADIUS Port number

Thomas C Kinnen (tkinnen@livingston.com)
Thu, 13 May 1999 08:52:36 -0700

Jose Carlos da Silva wrote:

> I am setting up a Portmaster 2e in my network where I already have a
> RADIUS server running on port 1812/1813 which are the current ports
> used by RADIUS accordingly to the LATEST RFCs. I have already several
> NASes using this RADIUS server on these ports, including a Livingston
> Portmaster 3.

You can not change the Ports in ComOSs below 3.8.

-- 
Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
[RADIUS Test Engineer] - LUCENT Technologies RABU
"All of the opinions stated above are my own and not my employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>