I have a problem with our Office Routers:
When a user connected via such a device is SENDING data, connection
constantly gets dropped and abort errors count up. Receiving data is no
problem.
This behaviour shows on all links that have an OR on one end, and the
problem stops if we replace the device with a cisco. (on the other =
side,
there always is a cisco). Any hints?
monty1> show w1
----------------------- Current Status - Port W1 =
---------------------------
Status: ESTABLISHED
Input: 4129131433 Abort Errors: 44249
Output: 1417345698 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 41
Modem Status: DCD+ CTS+
Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Netwrk (Hardwired)
Line Speed: Ext 64K Ext Clock
Modem Control: off off (No Hangup)
Remote Host: reinach1.datacomm.ch 255.255.255.255
Netmask: 0.0.0.0 0.0.0.0
Interface: ptpW1 (PPP,Routing) (PPP,Routing)
Mtu: 1500 0
Dial Group: 0
monty1> ver
Livingston PortMaster Office Router ComOS 3.7.2L
System uptime is 137 days 11 hours 27 minutes
Mit freundlichen Gr=FCssen
Patrick Kormann =09
DataComm (Schweiz) AG
Projektleiter Technik=20
=09
--=20
PGP Fingerprint: B52F 7B90 0DDE AADE A388 1E9B 43A6 5555 FC47 04EB=20
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>