> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On Behalf Of Curtis V.
> Schleich~~
> Sent: Tuesday, May 11, 1999 03:59
> To: portmaster-users@livingston.com
> Subject: (PM) PM Routing CPU Load Question
>
>
> Hello, all. I have a PM2ER currently doing nothing but routing a T1. I
> have two fully-loaded PM3s on the T1, plus a few Frame-Relay subnets. My
> question is, should I move the routing to one of the loaded PM3s using the
> Sync card, or is the 2ER with no modems capable of handling the load? I
> have seen discussion recently to the effect that the 2ER probably can't
> handle it, but I didn't get from the messages if it was actually handling
> any modems at the time.
>
> Also, does anyone know if there are SNMP values I can check on the 2ER and
> the 3 for CPU load? That would help us make a reality-based decision
> instead of guessing.
>
> Thanks all for your time!
>
> --------------------------
> Curtis V. Schleich
> CCA and CCAonline
> 217-735-2677
> cvs@ccaonline.com
> --------------------------
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>