> Hello, all. I have a PM2ER currently doing nothing but routing a T1. I
> have two fully-loaded PM3s on the T1, plus a few Frame-Relay subnets. My
> question is, should I move the routing to one of the loaded PM3s using the
> Sync card, or is the 2ER with no modems capable of handling the load? I
Monitor the PM2's WAN port and look for errors. If you are not getting any
then the traffic is probably low enough for the PM2 to deal with. Most
people on the list will recommend 60-90 Modems per PM2R doing routing. But
since the PM2 is not using it's Async Ports it may be able to handle a bit
more.
> Also, does anyone know if there are SNMP values I can check on the 2ER and
> the 3 for CPU load? That would help us make a reality-based decision
> instead of guessing.
No, You can search the archives for the full discussions on it but basically
the way ComOS works CPU monitoring world be useless.
-- Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com> [RADIUS Test Engineer] - LUCENT Technologies RABU "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>