Re: (PM) Second Class C
Thomas Kinnen (tkinnen@livingston.com)
Mon, 10 May 1999 11:19:44 -0700
GolSyd Internet wrote:
>
> I have a second class c (256 ips) just added to my network, all working
> fine on the LAN here, but for dial- ups via my PM3 (comos 3.8.2) , the PM
> is sending them to the router then back to the switch , how do i make it so
> they go straight to the switch and miss the router (as it does now for
> dials up accessing my network on the same Class C as the PM.
> I assume that it is a simple setting in the PM, and i m hoping that it wont
> require a reboot as my PM has been up for 121 days now :)) , without any
> problems too i might add. Bulletproof i say.
You could add a sub interface to the PM3's ethernet port and add a route that
way.
--
Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
[RADIUS Test Engineer] - LUCENT Technologies RABU
"All of the opinions stated above are my own and not my employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>