(PM) pm3 callback

Piotr Orlewicz (Piotr.Orlewicz@technologist.com)
Mon, 10 May 1999 09:01:27 +0200

This is a multi-part message in MIME format.

------=_NextPart_000_0139_01BE9AC3.AFF63100
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

****************** InterScan Message (on TPZ-Ultra02)

noname is scanned and no virus found
noname is scanned and no virus found
*********************************************************

------=_NextPart_000_0139_01BE9AC3.AFF63100
Content-Type: text/plain;
charset="iso-8859-2"
Content-Transfer-Encoding: quoted-printable

Hello,

I have problem with dialback for login users. In radius I have entrys:

test Auth-Type =3D System
Service-Type =3D Callback-Login-User,
....
Callback-Number =3D 7210220

When I set debug 0x51, I see, that pm try to dial and send AT\r command =
to the mode, then expect \r -CR never back to port. For network users =
callback working -but pm send VRAnumber command, not AT. What is wrong =
in My configuration. I use PM-3 with ComOS 3.8.2 and radius 2.0.1 for =
Solaris.

Regards
Peter

------=_NextPart_000_0139_01BE9AC3.AFF63100
Content-Type: text/html;
charset="iso-8859-2"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">

Hello,
 
I have problem with dialback for = login users. In=20 radius I have entrys:
 
test   =20 Auth-Type =3D System
        Service-Type = =3D=20 Callback-Login-User,
        = ....
        = Callback-Number =3D=20 7210220
 
 
When I set debug 0x51, I = see, that pm=20 try to dial and send AT\r command to the mode, then expect \r -CR never = back to=20 port. For network users callback working -but pm send VRAnumber command, = not AT.=20 What is wrong in My configuration. I use PM-3 with ComOS 3.8.2 and = radius 2.0.1=20 for Solaris.
 
Regards
Peter
 
 
------=_NextPart_000_0139_01BE9AC3.AFF63100-- - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: