I generally lurk here, so I may not be speaking from any moral authority
... and I'm not trying to be inflammatory ... but I have a couple of
questions:
* why does this person keep asking questions that can be found in the
docs?
* why do we keep answering them, instead of telling him to RTFM?
I can understand an occasional basic question that could have been
answered by looking at documentation (heck, I've done it myself, and felt
duly chastised when someone gently or not-so-gently pointed out that it
could be found if I looked) ... but this person is clearly using this list
as his own personal research tool, and while I sometimes find the
information useful, it's starting to get on my nerves. This is what docs
and FAQs are for.
If he had even read the table of contents to the ComOS command-line
reference, he would know where to find many of his answers. We've already
shown him how to fish, many times, We even bought him a tackle box and
some nice hip-waders. Let's let him catch a few on his own for a while.
Royce
<HTML><BODY><PRE>
Royce Williams royce@alaska.net 907 562 4132 <BR>
Network Administration - Internet Alaska <BR><A HREF="
http://www.alaska.net/~royce/ ">[pages]</A>
PGP key: 1024/1776A531, fingerprint: <BR>
E340 0759 8E06 DE8F 6CB8 DC33 501C 0AB5 1776 A531 <BR>
</PRE></BODY></HTML>
On Wed, 5 May 1999, Nair, Shibu (MED, Wipro Systems, Inc) wrote:
> Hi
> I have couple more questions....
> Believe me this is required for deciding the RAS product...
>
> 1)Does PM3 support inbound and outbound over same set of ports?(S0 to
> Sn)
> 2)Does PM3 support inbound and outbound over different set of ports?
> 3)Is it possible to configure PM3 for non ip dialout(Modem poool)?
> 4)Does my PM3 (with ComOS 3.8) support NAT? Which COMOs will support
> this?
> 5)Does it support MSCHAP (Somebody already pointed this but just
> confirming)?
> 6)Does PM3 is compatiable with hays/USR Courier/Motorola modems? (any
> test results)
> 7)Does it support monitoring capability of modem usage, modem status
> and bandwidth utilisation?
> 8)Does it has a remote administration capacity for multiple admin
> accounts which are passwd protective?
> 9)Does PM3 support redundancy in terms of powersupply
>
> TIA
>
> Answers for these questions are verymuch required for me to decide on
> the product...
>
> Pls help me out... TIA
>
> With Warm Regards
> Shibu R
> Senior Network Analyst
> ________________________________________________
> Mailto : Shibu.Nair@med.ge.com
> shibur@wipsys.soft.net
> Tel : (414) 524 5261
> Fax : (414) 896 2790
>
> GE Medical Systems,
> USA.
>
> ----------
> From: Thomas C Kinnen[SMTP:tkinnen@livingston.com]
> Reply To: Thomas C Kinnen
> Sent: Tuesday, May 04, 1999 10:38 AM
> To: portmaster-users@livingston.com
> Subject: Re: (PM) Secondary Ip addresses : How to
> configure
>
> "Nair, Shibu (MED, Wipro Systems, Inc)" wrote:
> >
> > Hi
> >
> > Can somebody pls let me know how to configure
> secondary ip address on
> > PM3 ....?
>
> In the Release Notes:
>
>
> http://www.livingston.com/tech/docs/release/release38.html#new-18
>
> --
> Thomas C Kinnen - <tkinnen@ra.lucent.com>
> <tkinnen@sobhrach.com>
> [RADIUS Test Engineer] - LUCENT Technologies RABU
> "All of the opinions stated above are my own and not my
> employer's,
> unless they were given to me by my employer"
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the
> message.
> Searchable list archive:
> <URL:http://www.livingston.com/Tech/archive/>
>
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>