> -----Original Message-----
> From: Roy Jackson [mailto:tull@mail.camalott.com]
> Sent: Friday, May 07, 1999 03:55
> To: James Courtier-Dutton
> Cc: Bullit; portmaster-users@livingston.com
> Subject: RE: (PM) Re: SHIT SHIT SHIT (Was PM) Upgrading to 3.8.2c2
>
>
> I used pmvision 1.2 on all of my pm3s they all still jus show 3.8.2 even
> after reboot.
>
>
> On Fri, 7 May 1999, James Courtier-Dutton wrote:
>
> > Hello
> > If you do a "ver" does it now show 3.8.2c2 ?
> > Try power off then on.
> > Cheers
> > James
> >
> >
> > > -----Original Message-----
> > > From: owner-portmaster-users@livingston.com
> > > [mailto:owner-portmaster-users@livingston.com]On Behalf Of Bullit
> > > Sent: Friday, May 07, 1999 03:24
> > > To: portmaster-users@livingston.com
> > > Subject: (PM) Re: SHIT SHIT SHIT (Was PM) Upgrading to 3.8.2c2
> > >
> > >
> > > Well, I rebooted like everyone said and the calls are already
> coming in.
> > > Now customers log on and within 30 seconds they get booted off.
> > > Everything
> > > was fine until I rebooted after upgrading to 3.8.2c2
> > >
> > > Any ideas??? Help
> > >
> > > TIA
> > >
> > > Michael
> > >
> > >
> > > ----- Original Message -----
> > > From: Mark Radabaugh <Mark@amplex.net>
> > > To: 'Michael R. Anderson' <manderson@pdqlink.com>
> > > Sent: Thursday, May 06, 1999 9:51 PM
> > > Subject: RE: (PM) Upgrading to 3.8.2c2
> > >
> > >
> > > > Reboot!
> > > >
> > > > Mark Radabaugh Amplex (419)833-3635
> > > > mark@amplex.net
> > > >
> > > > > -----Original Message-----
> > > > > From: owner-portmaster-users@livingston.com
> > > > > [mailto:owner-portmaster-users@livingston.com]On Behalf
> Of Michael R.
> > > > > Anderson
> > > > > Sent: Thursday, May 06, 1999 10:28 PM
> > > > > To: portmaster-users@livingston.com
> > > > > Subject: Re: (PM) Upgrading to 3.8.2c2
> > > > >
> > > > >
> > > > > I just upgraded one PM3 from 3.8 to 3.8.2c... After finally
> > > > > getting the
> > > > > download, the PM3 upgraded fine, but in PMVision 1.3, when
> > > > > logged in, it
> > > > > still says version 3.8
> > > > >
> > > > > I guess I'm still wondering if I should reboot after such an
> > > > > upgrade? Other
> > > > > than that everything seems to be working fine.
> > > > >
> > > > >
> > > > > -----Original Message-----
> > > > > From: I don't work for Lucent RABU <livingston@iav.com>
> > > > > To: portmaster-users@livingston.com
> <portmaster-users@livingston.com>
> > > > > Date: Thursday, May 06, 1999 8:47 PM
> > > > > Subject: Re: (PM) Upgrading to 3.8.2c2
> > > > >
> > > > >
> > > > > >On Wed, 5 May 1999, Eric Calvert wrote:
> > > > > >
> > > > > >> and a half hours later, the telco gets back to me and says
> > > > > >> "Have you powered off your equipment?" I say "No" (feeling
> > > > > >> stupid while I'm saying it). He says "Try that." I did. It
> > > > > >> worked.
> > > > > >>
> > > > > >> Who knew I should have called GTE for tech support on my
> > > > > >> Lucent equipment????
> > > > > >>
> > > > > >> The moral of the story...
> > > > > >>
> > > > > >> If your PM-3 won't answer calls after an upgrade, try power
> > > > > >> cycling it. A reboot may not be enough.
> > > > > >
> > > > > >That's my standard procedure since 3.5 or 3.7 ... A reboot
> > > > > seems to hang
> > > > > >things since memory isn't cleared properly (a guess).
> > > > > >
> > > > > >After any upgrade on a PM a power cycle is done here.
> > > > > >
> > > > > >8)
> > > > > >
> > > > > >
> > > > > >--
> > > > > >Aloha from Paradise,
> > > > > >
> > > > > >Sherwood
> > > > > >Got Clue? If so: ISPF! The Forum for ISPs by ISPs,
> > > > <http://www.ispf.com>
> > > > >
> > > > >-
> > > > >To unsubscribe, email 'majordomo@livingston.com' with
> > > > >'unsubscribe portmaster-users' in the body of the message.
> > > > >Searchable list archive:
> <URL:http://www.livingston.com/Tech/archive/>
> > > > >
> > > >
> > > > -
> > > > To unsubscribe, email 'majordomo@livingston.com' with
> > > > 'unsubscribe portmaster-users' in the body of the message.
> > > > Searchable list archive:
> <URL:http://www.livingston.com/Tech/archive/>
> > > >
> > > >
> > >
> > > -
> > > To unsubscribe, email 'majordomo@livingston.com' with
> > > 'unsubscribe portmaster-users' in the body of the message.
> > > Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
> > >
> >
> > -
> > To unsubscribe, email 'majordomo@livingston.com' with
> > 'unsubscribe portmaster-users' in the body of the message.
> > Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
> >
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>