On Fri, 7 May 1999, James Courtier-Dutton wrote:
> Hello
> If you do a "ver" does it now show 3.8.2c2 ?
> Try power off then on.
> Cheers
> James
>
>
> > -----Original Message-----
> > From: owner-portmaster-users@livingston.com
> > [mailto:owner-portmaster-users@livingston.com]On Behalf Of Bullit
> > Sent: Friday, May 07, 1999 03:24
> > To: portmaster-users@livingston.com
> > Subject: (PM) Re: SHIT SHIT SHIT (Was PM) Upgrading to 3.8.2c2
> >
> >
> > Well, I rebooted like everyone said and the calls are already coming in.
> > Now customers log on and within 30 seconds they get booted off.
> > Everything
> > was fine until I rebooted after upgrading to 3.8.2c2
> >
> > Any ideas??? Help
> >
> > TIA
> >
> > Michael
> >
> >
> > ----- Original Message -----
> > From: Mark Radabaugh <Mark@amplex.net>
> > To: 'Michael R. Anderson' <manderson@pdqlink.com>
> > Sent: Thursday, May 06, 1999 9:51 PM
> > Subject: RE: (PM) Upgrading to 3.8.2c2
> >
> >
> > > Reboot!
> > >
> > > Mark Radabaugh Amplex (419)833-3635
> > > mark@amplex.net
> > >
> > > > -----Original Message-----
> > > > From: owner-portmaster-users@livingston.com
> > > > [mailto:owner-portmaster-users@livingston.com]On Behalf Of Michael R.
> > > > Anderson
> > > > Sent: Thursday, May 06, 1999 10:28 PM
> > > > To: portmaster-users@livingston.com
> > > > Subject: Re: (PM) Upgrading to 3.8.2c2
> > > >
> > > >
> > > > I just upgraded one PM3 from 3.8 to 3.8.2c... After finally
> > > > getting the
> > > > download, the PM3 upgraded fine, but in PMVision 1.3, when
> > > > logged in, it
> > > > still says version 3.8
> > > >
> > > > I guess I'm still wondering if I should reboot after such an
> > > > upgrade? Other
> > > > than that everything seems to be working fine.
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: I don't work for Lucent RABU <livingston@iav.com>
> > > > To: portmaster-users@livingston.com <portmaster-users@livingston.com>
> > > > Date: Thursday, May 06, 1999 8:47 PM
> > > > Subject: Re: (PM) Upgrading to 3.8.2c2
> > > >
> > > >
> > > > >On Wed, 5 May 1999, Eric Calvert wrote:
> > > > >
> > > > >> and a half hours later, the telco gets back to me and says
> > > > >> "Have you powered off your equipment?" I say "No" (feeling
> > > > >> stupid while I'm saying it). He says "Try that." I did. It
> > > > >> worked.
> > > > >>
> > > > >> Who knew I should have called GTE for tech support on my
> > > > >> Lucent equipment????
> > > > >>
> > > > >> The moral of the story...
> > > > >>
> > > > >> If your PM-3 won't answer calls after an upgrade, try power
> > > > >> cycling it. A reboot may not be enough.
> > > > >
> > > > >That's my standard procedure since 3.5 or 3.7 ... A reboot
> > > > seems to hang
> > > > >things since memory isn't cleared properly (a guess).
> > > > >
> > > > >After any upgrade on a PM a power cycle is done here.
> > > > >
> > > > >8)
> > > > >
> > > > >
> > > > >--
> > > > >Aloha from Paradise,
> > > > >
> > > > >Sherwood
> > > > >Got Clue? If so: ISPF! The Forum for ISPs by ISPs,
> > > <http://www.ispf.com>
> > > >
> > > >-
> > > >To unsubscribe, email 'majordomo@livingston.com' with
> > > >'unsubscribe portmaster-users' in the body of the message.
> > > >Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
> > > >
> > >
> > > -
> > > To unsubscribe, email 'majordomo@livingston.com' with
> > > 'unsubscribe portmaster-users' in the body of the message.
> > > Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
> > >
> > >
> >
> > -
> > To unsubscribe, email 'majordomo@livingston.com' with
> > 'unsubscribe portmaster-users' in the body of the message.
> > Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
> >
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>